ZR Corrosion Inhibitor

Product Introduction:

ZR Corrosion Inhibitor is a corrosion inhibitor with imidazoline derivative as the mainconstituent, compounded with active agent, regulator, wetting agent and other multiplechemical agents. It is characterized by low application cost, benefiting to crude oil recovery,transportation, reinjection water treatment, measurement, reduction of oil piping corrosion,etc, having extended the service life of crude oil pipeline and solved the problem withcorrosion of oilfield crude oill and reinjection water pipelines.

Technical Indicators:

Application:

It is widely applicable to corrosion prevention and corrosion inhibition for oifield reinjection water system as well as crude oilgathering and transportation pipelines, typical of good effect.

Method of Application:

This product is miscible with water, and may be continuously pumped into water treatment system according to theconcentration for use. The recommended concentration for use is 30-70m/L, determinable up to the site actual situation.

Notices:

1. Skin contact shall be avoided as much as possible, taking orally is strictly prohibited, and it shall be immediately flushed if flling into eyes. Go to doctors for diagnosis and treatment when necessary.

2. Pay attention to safety and wear labor protective articles when it is used on site, and it is strictly prohibited for the chemical to splash into eyes and to leak.

3. Contact with eyes, skink and clothes shall be avoided, and otherwise large amount of clear water is required for flushing, and go to doctors for diagnosis and treatment when necessary.

Package:

This product is packed in the dry and clean iron drum or plastic bucket, at a 50~200kg packing specification, determinable according to user requirement.